Tacktick T075 Race Master System

Tacktick T075 Race Master System

• No wires, or connections to make
• Solar powered (300 hours autonomy)
• Twin displays with super-large digits
• Backlighting (3 levels with auto shut off)
• Battery level indicator
• Totally waterproof (submersible to 10m)
• Shock resistant
• Lightweight
• Full calibration

The Tacktick T075 Race Master System offers you all of the benefits of the Tacktick T070 Race Master but can comes with a Tacktick Micronet Hull Transmitter to provide boat speed and depth data. The Tacktick T075 Race Master System can then be further extended to allow the addition of Wind and GPS information as well as compatibility with the complete range of Tacktick Micronet Displays.

The Tacktick T070 Race Master's two-tier display shows your heading, how far you are above or below the mean course, and how much you are being headed or lifted. It will enable you to establish quickly and easily which is the favoured end of the start line, and will help you sail the shortest distance to the windward mark. Downwind, you can see how far off dead downwind you are, and when you should gybe for optimal VMG.

• Compass Heading
• Wind Shift Indicator
• Line Bias
• Race Timer

Tacktick T121 Micronet Hull Transmitter

• Only 230g (0.51lbs)
• 9 - 24 V external power supply

The Speed, Depth and Compass Transducers link to the Tacktick T121 Micronet Hull Transmitter which sends the information to the Tacktick Micronet Displays by wireless link. It can be sited anywhere conveient on the boat usually close to the transducers.

Tacktick T138 Solar Panel for Micronet Transmitters

• Small footprint
• Easy installation

Solar panel suitable for supplying power to a Tacktick Micronet T121 Hull Transmitter or Tacktick T122 Wireless NMEA Interface.

Tacktick T910 Combined Speed/Temperature and Depth Transducer

• Requires only one hole in the hull
• Max. Hull thickness 55mm (2.125")
• Fitted with a flap valve
• Includes temperature sensor
• Retractable Through Hull Transducer
• 51mm (2") diameter
• For Hull thickness up to 55mm (2.125") maximum
• Self Sealing Cap
• Supplied with a low profile housing and blanking plug
• Includes internal temperature sensor
• Removeable for cleaning