Raymarine ST60+ Speed System

Raymarine ST60+ Speed System with plastic through hull transducer

Raymarine ST60+ Speed System
The Raymarine ST60+ Speed System provides accurate speed, log, trip and timer information on its extra-large, high quality LCD display. Offering three levels of back lighting as well as superior and contrast and visibility, the Raymarine ST60+ Speed instrument can be easily seen day or night. The instrument is constructed in a rugged, waterproof case (CFR46) to provide reliable performance, even under the most demanding conditions.

The Raymarine ST60+ Speed instrument receives data either from its connected speed transducer (master mode) or from another speed-calculating device connected to the SeaTalk data network. Additional Raymarine ST60+ Speed displays can be added as repeaters wherever needed simply by connecting them to the SeaTalk network and configuring them as repeaters. The Raymarine ST60+ Speed system can also be installed as a stand-alone device independent of other on board systems.

More than just a speed log, Raymarine ST60+ Speed calculates a wealth of speed related information including current speed, maximum speed, average speed, velocity made good (VMG) and speed over ground. Raymarine ST60+ Speed also keeps track of distances traveled with its boat log and resetable trip distance displays. The Raymarine ST60+ Speed instrument also displays water temperature in degrees fahrenheit or celsius. The Raymarine ST60+ Speed instruments' timer capabilities include a count-up timer and two race-start timers.

Raymarine ST60+ instruments offer convenient and flexible mounting configurations. Out-of-the box each Raymarine ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead. Using the optional flush-mount kit (A25003-P) Raymarine ST60+ instruments can be low-profile mounted, matching Raymarine C Series, E Series and G Series multifunction and marine displays. For installation on a table-top or from the overhead use the optional Raymarine ST60+ bracket mounting kit (E25009.)

The Raymarine ST60+ Speed System comes complete with display unit, sun cover, SeaTalk and power cables, an ST800-P120 plastic thru-hull speed/temperature transducer, surface mount kit and complete instructions.

Raymarine ST60+ Speed features

• • Current, maximum and average speed displays.
  • Speed performance from 0 to 60 knots.
  • Log range from 0 to 99,999 nautical miles.
  • Trip range from 0 to 999 nautical miles.
  • Temperature range from -10°C to +40°C
  • User selectable 'Pop Up Pilot' display reports changes to connected SeaTalk autopilot mode or course settings.
  • Speed Over Ground (SOG) display (when interfaced with SeaTalk compatible GPS)
  • Velocity Made Good display (when interfaced with SeaTalk compatible wind instrument.)
  • Adjustable display response.
  • Extra-large digits with high contrast and wide viewing angle.
  • Manual or automatic calibration from GPS speed over ground (SOG).
  • Standard surface mount kit included, optional flush or bracket mounts available.
  • Intuitive 4-button control layout.
  • Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders.
  • Compatible with the wireless SmartController autopilot control and instrument repeater.

Raymarine ST60+ Speed System Specifications

• • Autopilot Status Repeater: Yes
  • Soft Power Down: Yes
  • Adjustable Display Response Time: Yes
  • EMC (Europe and FCC): Yes
  • CE marked: Yes
  • SeaTalk: 2 connections
  • NMEA input and output (0183): option via E85001
  • PC (RS232) and RayTech interface: option via E85001
  • Speed Data: current/max/average/SOG
  • Speed range (knots) (transducer dependant): 0 to 60kts
  • Speed Resolution: 1/100 knot resolution
  • Log range (nm): 0 to 99999nm
  • Trip range (nm): 0 to 000nm
  • Speed Units: knots/kph/mph
  • Water temperature (transducer dependant): -10°C to +40°C
  • VMG (Velocity Made Good): Yes, When interfaced to a SeaTalk compatible Wind system.
  • SOG (Speed Over Ground): Yes, When interfaced to a SeaTalk compatible GPS system.
  • Autopilot Status Repeater: Yes
  • Operating temperature range: -15°C to +55°C
  • Non-operating temperature range: -25°C to +70°C
  • Humidity: up to 95%
  • Waterproofing standard: IPX6 & CFR46
  • Overall dimensions (WxHxD) mm (standard bezel): 110x115x39
  • Mounting methods: flush/surface/bracket
  • Control type(s): 4 backlit buttons
  • Display size and type: 92mm segmented LCD
  • Maximum character size: 36mm
  • Display lighting: 3 levels plus off
  • Nominal voltage (volts DC): 12V systems
  • Absolute voltage range: 10 – 16 volts
  • Power consumption (typical) mA: 45mA