Raymarine ST60+ Graphic Display

Raymarine ST60+ Graphic Display

The Raymarine ST60+ Graphic Display repeats data from other connected SeaTalk instruments on a high-quality dot matrix LCD display. Offering three levels of backlighting as well as superior contrast and visibility, the Raymarine ST60+ Graphic instrument can be easily seen day or night. The instrument is constructed in a rugged, waterproof case to provide reliable performance, even under the most demanding conditions.

The Raymarine ST60+ Graphic Display receives SeaTalk and select NMEA 0183 data from other onboard data sources like your GPS, chartplotter, wind instrument, depth sounder, autopilot system and more. Additional Raymarine ST60+ Graphic displays can be added wherever needed simply by connecting them to the SeaTalk network.

The Raymarine ST60+ Graphic instrument provides fast and easy access to all of your SeaTalk navigation data. For ease of use the Raymarine ST60+ Graphic breaks this data down into convenient chapters and pages. It also features a user-customizable favorites chapter that you can configure with your most frequently used pages.

Thanks to its dot matrix display the Raymarine ST60+ Graphic can display both numeric readouts and graphical data like histograms, diagrams and graphs. Numerical displays can be adjusted to show 1, 2, 3 or 4 different data elements simultaneously.

The Raymarine ST60+ Graphic display supports a range of SeaTalk system alarm signals and responds accordingly with both audible and visual on-screen alarm messages. In addition to this, the Raymarine ST60+ Graphic can also provide external alarm signals for the optional SeaTalk Auxiliary Alarm Module. This option is particularly useful for situations where high ambient noise may make it difficult to hear the instrument’s internal alarm, or to provide audible alarm signals at another location on board the boat.

Raymarine ST60+ instruments offer convenient and flexible mounting configurations. Out-of-the box each Raymarine ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead. Using the optional flush-mount kit (A25003-P) Raymarine ST60+ instruments can be low-profile mounted, matching Raymarine C Series, E Series and G Series multifunction and marine displays. For installation on a table-top or from the overhead use the optional Raymarine ST60+ bracket mounting kit (E25009.)

The Raymarine ST60+ Graphic Display comes with display unit, sun cover, SeaTalk and power cables, surface mount kit and complete instructions. To display data on the Raymarine ST60+ Graphic display you will need to integrate it with your existing SeaTalk or NMEA 0183 compatible devices.

Raymarine ST60+ Graphic features

• The ultimate repeater display for your onboard systems.
• Monitor all SeaTalk navigation data from a single display.
• Displays depth, speed, wind, GPS, navigation data, environmental data and more.
• Choose between single and multi-line numeric readouts as well as histograms and graphs.
• Convenient Chapter and Page layout makes finding infomation fast and easy.
• User-configurable favorites chapter allows you to set your most frequently used items.
• Favorites auto-scroll switches between favorite pages at your preset intervals.
• Dot matrix LCD display with wide viewing angle and sharp contrast.
• Adjustable display response.
• Standard surface mount kit included, optional flush or bracket mounts available.
• Intuitive 4-button control layout.
• Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders.

Raymarine ST60+ Graphic Specifications

• Configurable favorites pages: Yes
• Graphical Readouts: Yes
• Multi-line data: Yes
• CDI Rolling Road: Yes
• XTE Steer Bar: Yes
• VMG (Velocity Made Good): Yes
• Trends: Yes, arrows and graphs
• GPS repeater: Yes
• Waypoint data repeater: Yes
• Autopilot status repeater: Yes
• Soft' power down: Yes
• Vessel power monitor: Battery volts and alarm
• External alarm relay: Yes, When external alarm relay option is on, NMEA 0183 out is not available.
• EMC (Europe and FCC): Yes
• CE marked: Yes
• SeaTalk: 2 connections
• NMEA input and output (0183): 1 input, 1 output
• PC (RS232) and RayTech interface: option via E85001
• Speed data: current, max, average, SOG
• Speed range: 0 to 60 kts.
• Log range (nm): 0 to 99999 nm
• Trip range (nm): 0 to 999.99 nm
• Speed units: knots, kilometers per hour, miles per hour
• Water temperature (transducer dependant): -10°C to +40°C
• Depth data: current, minumum, maximum
• Depth range (m) (transducer dependant): 0.8 to 180 m (600')
• Depth alarms: Repeat and acknowledge only. Alarm values set by your depth instrument or fishfinder.
• Depth units: feet, fathoms or meters
• Wind speed data: apparent, true, maximum
• Wind speed range (transducer dependent): 0 to 60 knots
• Wind angle data: apparent, true
• Wind angle range: 180° port and starboard
• Wind alarms: Repeat and acknowledge only. Alarm values set by your wind instrument master.
• Wind units: knots, meters per secont, Beaufort
• Heading data: current, locked, average
• Heading units: Degrees magnetic or true
• Heading alarms: Repeat and acknowledge only. Alarm values set by your compass or autopilot system master.
• Locked compass heading: Repeater only
• Timers: date/time/timers
• Rudder angle indicator: Yes
• Operating temperature range: -15°C to +55°C
• Non-operating temperature range: -25°C to +70°C
• Humidity: up to 95%
• Waterproofing standard: IPX6 & CFR46
• Overall dimensions (WxHxD) mm (standard bezel): 110x115x39
• Mounting methods: flush/surface/bracket
• Control type(s): 4 backlit buttons
• Display size and type: 92mm dot matrix LCD
• Maximum character size: 36mm
• Display lighting: 3 levels plus off
• Nominal voltage (volts DC): 12V systems
• Absolute voltage range: 10 – 16 volts
• Power consumption (typical) mA: 50mA