Raymarine ST60 Compass System with fluxgate compass
The Raymarine ST60+ Compass System provides accurate magnetic heading and course deviation information on a combination analog and LCD display. Offering three levels of backlighting on the LCD and dial, as well as superior contrast and visibility, the Raymarine ST60+ Compass instrument can be easily seen day or night. The instrument is constructed in a rugged, waterproof case to provide reliable performance, even under the most demanding conditions.
The Raymarine ST60+ Compass Display receives heading data either from a connected fluxgate compass transducer or via SeaTalk networking from other onboard data sources like an autopilot system (repeater mode). Additional Raymarine ST60+ Compass displays can be added wherever needed simply by connecting them to the SeaTalk network and configuring them as repeaters. The Raymarine ST60+ Compass system can also be installed as a stand-alone device independent of other onboard systems.
The Raymarine ST60+ Compass instrument provides compass heading, shown in digital form (numerals) plus, when in locked heading mode, steering course error to +/- 30º deviation of locked course heading, shown in analog form by the pointer. The Raymarine ST60+ Compass Instrument can also display Course-Over-Ground (COG) when interfaced with a SeaTalk GPS receiver as well as average heading.
Raymarine ST60+ instruments offer convenient and flexible mounting configurations. Out-of-the box each Raymarine ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead. Using the optional flush-mount kit (A25003-P) Raymarine ST60+ instruments can be low-profile mounted, matching Raymarine C Series, E Series and G Series multifunction and marine displays. For installation on a table-top or from the overhead use the optional Raymarine ST60+ bracket mounting kit (E25009).
The Raymarine ST60+ Compass System comes with display unit, fluxgate compass transducer, sun cover, SeaTalk and power cables, surface mount kit and complete instructions.
Raymarine ST60+ Compass System features
-
Current, locked and average heading displays
-
Magnetic or true hading readout
-
Course Over Ground (COG) display when connected to SeaTalk GPS source.
-
Adjustable display response.
-
Standard surface mount kit included, optional flush or bracket mounts available.
-
Intuitive 4-button control layout.
-
Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders.
-
Compatible with the wireless SmartController autopilot control and instrument repeater.
Raymarine ST60+ Compass System Specifications
-
Soft Power Down: Yes
-
Adjustable Display Response Time: LCD and pointer
-
EMC (Europe and FCC): Yes
-
CE marked: Yes
-
SeaTalk: 2 connections
-
NMEA input and output (0183): option via E85001
-
PC (RS232) and RayTech interface: option via E85001
-
Heading Data: Current, locked, average
-
Heading readout: Degrees magnetic or true
-
Course Over Ground: Yes When SeaTalk GPS is available.
-
Operating temperature range: -10°C to +70°C
-
Non-operating temperature range: -20°C to +70°C
-
Humidity: up to 95%
-
Waterproofing standard: IPX6 & CFR46
-
Overall dimensions (WxHxD) mm (standard bezel): 110x115x39
-
Mounting methods: flush/surface/bracket
-
Control type(s): 4 backlit buttons
-
Display size and type: 34mm segmented LCD & pointer
-
Maximum character size: 13mm
-
Display lighting: 3 levels plus off
-
Nominal voltage (volts DC): 12V systems
-
Absolute voltage range: 10 – 16 volts
-
Power consumption (typical) mA: 65mA
