easySPLIT 2. Generation

easySPLIT 2. Generation

Extend the use of your aerial - active VHF frequency splitter

easySPLIT 2. Generation Functionality
The easySPLIT checks whether there is a transmission from the VHF radio to the Antenna. If this is the case the easySPLIT disconnects very fast from the other connected units, such as the the AIS receiver and the car radio. If all the units are in reception mode, the units are all connected to the same antenna.

What is necessary to use the easySPLIT 2. Generation
As the easySPLIT is a splitter, you do nothing else need than your (already) existing VHF antenna and of course a power supply.

What fits to the easySPLIT 2. Generation?
All existing VHF Radios, all existing AIS receivers and all existing FM radios can be connected to the easySPLIT. Nevertheless the optimum performance is achieved if you use other units from the Weatherdock AG company, because these units are designed to work together in a perfect way.

easySPLIT 2. Generation Characteristics

• Active VHF Splitter to connect through the standard VHF antenna:
• VHF Radio
• AIS receiver (Recommended for use with easyAIS)
• FM car radio
• Enlarged DC power input

easySPLIT 2. Generation Specification

• Frequency selective power divider with 1 Transmitt/Receive port (VHF Radio) and 2 receiver ports
  
• VHF Antenna: 50Ohm, SO 239
• VHF Radio (IN/OUT): 50Ohm, SO239
  
• AIS Receiver: 50Ohm, BNC
  
• FM Radio: 50 Ohm, Chinch
• Power: 9v-28VDC, @<120mA average over the different modes of operation
  
• Ambient conditions: under deck, 0C to 60C
  
• 140mm (l) x 140mm (w) x 35mm (h)
  
• Weight: app. 450 gr