easyAIS 2. Generation

easyAIS 2. Generation

easyAIS 2. Generation Functionality
The easyAIS 2. Generation receives the AIS VHF radio signals, acutally most send by the commercial vessels (but also from a increasing figure of pleasure boaters). This signals are proceeded into an NMEA Signal which can be interpreted from the latest chartplotter or a PC software.

What is necessary to use the easyAIS 2. Generation?
There is necessary an own VHF antenna. As an alternative you can use the easySPLIT, with which you can connect the existing VHF antenna for the reception of the AIS.

Which Chart plotter/PC software fits together with the easyAIS 2. Generation?
Most of the nowadays new chart plotters or PC software are capable to show AIS data on the screen. Nevertheless please check with your distributor whether your chart plotter/PC software is actual and can manage and display incoming NMEA data.

easyAIS 2. Generation Characteristics

• 2 channel AIS receiver with newest micro processor technology
• Highest sensitivity at optimized selectivity
• Integrated multiplexer up converting from 4,8kB to 38,4kB
• Integrated multiplexer up converting from 4,8kB to 38,4kB

easyAIS 2. Generation Specification

• 2 channel receiver to receive AIS data on 161,975MHz and 162,025 MHz
• Sensitivity: -112dBm (Therefore -3dBm better than the norm for class A receivers!!)
• Channel spacing: 25kHz
• Enlarged power input: 9VDC-28VDC, 80mA
• Antenna connector: BNC socket. 50 Ohm
• Baud rate: 38,4kB (optional 4,8kB by means of a jumper setting)
• NMEA output message: VDM
• Ambient conditions: under deck, 0C to 60C
• 140mm (l) x 140mm (w) x 35mm (h)
• Weight: app. 400 gr